Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2007, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 11 Oct 2007 12:16:07 -0400
Reply-To:     Kenneth Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kenneth Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: fuel tank reseal and fuel line kits
Comments: To: Dvdclarksn@AOL.COM
In-Reply-To:  <c2f.1d9959e7.343ee217@aol.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

My gastankkit1 for $103 will fix your gas tank leak problem. Then we have the fuel1 kit for the fuel line in the engine bay for $75. I recommend doing away with the plastic fitting on the firewall as this is a failure point. I discuss this in the instructions that come with my fuel1 kit. Also fuel2 is the fuel injector seal kit.$8. These kits hit the trouble spots in the system where it will normally leak or cause a fire. There is still a long run from the engine bay to the gas tank and also from the engine to the fuel pump that is not covered by any of these kits. This run is actually plastic piping that I have not seen fail before and therefore no one that I know of sells this in kit form. Also there is less than a meter of 7mm hose and about 24" of 12mm hose that you will need to replace at the fuel pump, and gas tank (supply and return). I can supply all of this and make a master kit for everything but no one has ever requested this before. If you are interested please pmail me and I'll come up with a price for you. If anyone else is interested let me know as well.

Thanks, Ken Wilford John 3:16 www.vanagain.com

David Clarkson wrote: > Hey all of you friendly online vendors that support the list I am looking > for a price quote for parts that we all need. I need to replace all of the seals > from the tank filler neck seal, plastic connector, grommets, low and high > pressure lines, firewall plastic piece and injector seals on my 90 Westfalia. > We all need to do this job and it only makes sense to do it all at once and > to do it completely. Different vendors have "kits" but most kits only contain > part of the necessary parts to do the job completely. Which vendor has the > best overall deal? I have looked at Van-Again, Van Cafe and Bus Depot so far. > Any list members want to chime in with recommendations. Any vendors want to > offer a truly complete kit and maybe a discount for list members? We all know > of the pitfalls of using cheap and usually domestically available fuel line. > Forgive me if this has been discussed previously. I could not find any info > on a "complete kit" in the archives. Thanks to all who can help. > > David Clarkson > 90 Westfalia (with dangerous drips at the tank) > > > > ************************************** See what's new at http://www.aol.com > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.