Date: Thu, 18 Oct 2007 21:32:03 -0700
Reply-To: Nunya Business <bulletheadx@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Nunya Business <bulletheadx@GMAIL.COM>
Subject: Re: composite bodywork and painting questions
In-Reply-To: <485c3ee60710182053v54fd9a70rd829e15e692e1f7c@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Uh... what part of Arkansas are you from?
Cya,
Robert
On 10/18/07, Ben S <phlogiston420@gmail.com> wrote:
>
> i am in the process of doing a hack job repairing some rather severe
> body damage to my van and have a couple of questions. i was able to
> hammer the damaged panel to within an inch or so of the panel it
> seperated from, now i plan to fiberglass over the gap. i am planning
> to tape over the gap from the outside, spray in some expanding foam
> then sand it into shape to form a base for the glass. what i'm
> wondering about is the best way to keep the fiberglass from sliding
> down the side of the vertical surface while i wait for the resin to
> set. i was thinking of taping the top of the fiber to some metal then
> coming back later to put resin on the topmost part after the rest has
> set. but i also saw that bondo makes a "jelly resin". has anyone had
> experience with this? is it a good "non sag" solution for putting a
> lot of glass on a vertical surface? any other suggestions on getting
> this to stick?
>
> next question: i'm going to do a nice hack paint job over my hack
> body work. i was thinking of using rust oleum rusty metal primer and
> then some matte black brush applied paint. anyone know if this is
> compatible with whatever vw paint i dont sand off? anyone have a rec
> of good brand of paint?
>
> thanks.
>
> Ben.
>
|
Back to: Top of message | Previous page | Main VANAGON page
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives
@ gerry.vanagon.com
The vanagon mailing list archives are copyright (c)
1994-2011, and may not be reproduced without the
express written permission of the list administrators.
Posting messages to this mailing list grants
a license to the mailing list administrators to reproduce
the message in a compilation, either printed or electronic.
All compilations will be not-for-profit, with any excess
proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively
towards the management and operation of the Vanagon mailing
list and vanagon mailing list web site.