Date:         Mon, 15 Oct 2007 06:29:33 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: firewall fuel fitting
Comments: cc: azsun99@EARTHLINK.NET
Content-Type: text/plain; charset="US-ASCII"

In a message dated 14/10/2007 11:07:50 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

firewall  fuel fitting




        Jerry, you do not need any  fitting.  Check how the return hose
connects to the main plastic fuel line  behind the firewall.  Do the same with the
supply line.  Just run a  new fuel line from the metal T junction to the
plastic line under the  firewall, The fuel hose slips on top of the plastic line,
use a fuel hose  specific clamp and install some sheathing to protect it then
tie wrap it to the  fire wall so it wont move around and chaff.  I have done
every van that has  passed through my shop in the last two years this way.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://members.aol.com/Fkc43/trainsal.htm) )
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
- Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 07 ~ 10,  2007