Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2007, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 20 Oct 2007 07:04:12 -0700
Reply-To:     Michael Elliott <camping.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Elliott <camping.elliott@GMAIL.COM>
Subject:      Re: Home Made version of "the easy-bleed" for de-airing your
              van's rad.
Comments: To: Don Hanson <dhanson@GORGE.NET>
In-Reply-To:  <000901c81318$b5574f40$69b2d8d1@laptop>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi Don,

Looks to be a handy-dandy way to top off the rad! Permission to post it in the wiki?

Is there also a commercial version of the "easy bleed"?

-- Mike "Rocket J Squirrel" Elliott 71 Type 2: the Wonderbus 84 Westfalia: Mellow Yellow ("The Electrical Banana") 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano KG6RCR

On 10/20/2007 5:57 AM Don Hanson wrote:

> Get a peice of hard tubing that is slightly smaller than the I.D. of the > radiator air bleed bolt hole. Available in the Northwest at True Value > Hardware or other sources. Bend it into an S-shape. Attach a funnel type > device and pour some coolant into the device with the hard tubing inside the > treaded hole where the air bleed screw sits.. The S-curve in the hard > tubing between the funnel and the end of the tubing will support the funnel > device. I do this when the motor is off, usually after driving my van and > with the nose up a bit. It would probably be smart to turn on your heaters > as you approach your 'bleeding-site"... > Pour about a cup of coolant into the funnel and watch the air come > bubbling out of the rad. Repeat. When you get a solid stream of liquid, > you are done (for this time)..I do this drill a few times, until I get no > more bubbling when I add coolant. I keep my dorky-device in the van for > road emergencies and I usually do a "pre-trip" air-bleed procedure. Takes > me about 2 mins to remove/bleed/replace. > Wonder why VW made the bleed screw so hard to get to when it gets used so > often and can be the cause of so many problems with a Vanagon.. > Don Hanson >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.