Ah ok. Figured it might have been "too good to be true" ! Good to know the KEP plate can be ordered with both sets of holes. That was something I had heard of and was wondering about. Thanks,
Neil.
On 10/24/07, Mark Drillock <drillock@earthlink.net> wrote: > No, you need a Kennedy kit. Order it with both 15 and 50 degree holes so > you can change later if so desired. It also comes with a flywheel that > works with the stock Vanagon boxer engine clutch and starter. > > Mark > > neil N wrote: > > > Hi all. > > > > Forgive me if this is totally ignorant, but will a Fox clutch housing > > bolt onto a Vanagon tranny? > > > > Even if it did, maybe the clutch operating lever might be on the wrong side? > > > > Hmmm....... > > > > Thanks! > > > > > > Neil. > > > > -- > > Neil Nicholson. 1981 Air Cooled Westfalia - > > "Jaco" (Bustorius) > > > > http://web.mac.com/tubaneil > > >
-- Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" (Bustorius) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.