The short one listed is 76mm so the 97mm should be right. Mark Bob Donalds wrote: > the automatic stud is shorter than the std trany stud > 97 MM sounds short > Bob > > > ----- Original Message ----- > From: "Old Volks Home" <oldvolkshome@GMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, October 23, 2007 9:43 AM > Subject: Re: Need the two lower studs that secure the transmission to the > engine - No P# in ETKA > > >> Chris - >> >> Actually, these should be studs: >> VW # N0146752 - 10 x 97mm >> Illustration 3-10, Key #43 > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.