Hi Michele, I've fwd some of the hits with the procedure below, it was under fuel injection adjustment, as it's part of a sequence of adjustments. BTW I search for AFM where authors address is kelphoto. I could not find a real detailed afm adjustment write up, although I didn't read every one of hte 49 hits. Its there, but included along with the other ECU stuff. If you mark you original toothed wheel location it will be a good referenc. You may have another parameter out of range, but assuming the fuel pressure, timeing and Temp II are good, then AFM is next. Michael Elliott wrote: > Hi Mark, I have scoured the gerry.vanagon.com archives for your early > 1999-2000 posts on adjusting the AFM and can't find them. Have found > many posts referencing them, but the originals are hiding from me. Do > you have anything on hand you could forward to me? > http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0011B&L=vanagon&P=R19755 http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0105C&L=vanagon&P=R9498 http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0104D&L=vanagon&P=R26906&m=135497 <http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0104D&L=vanagon&P=R26906&m=135497> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.