The adapters for the one pound bottles are, part # 4503143 post adapter. You use 2 of these hooked together with a 1/4 inch coupling. When you put your extend-a-stay on it all depends on the location of the 1 inch male. Mine ended up pointing down. The metal guard that protects the tank has a hole almost directly under this fitting. I had to inlarge this hole to make it work. I also had to add 2 close nipples to the 2 post adapters to get it below the plate. My whole adapter, from post adapter to post adapter is about 3 inches long. Might be better explained his way. post adapter close nipple coupling close nipple post adapter. I hope i don't have everybody completely confused. If you e-mail me direct i can send you pics. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.