Date:         Mon, 5 Nov 2007 15:47:02 -0500
Reply-To:     Jeff Lincoln <magikvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Lincoln <magikvw@GMAIL.COM>
Subject:      Coolant Light
Content-Type: text/plain; charset=ISO-8859-1

Ok folks - I think i already know the answer to this but I am hoping for any
further insight.

Driving back towards home this morning I noticed the collant light begin to
blink - needle stayed where it normally is just below the light. I was
concerned because it has never ever ever come on before (well in the approx
1yr I've had it running). Now I pulled over and shut down for a few. Checked
collant level all appears to be well. So I started her back up to see what
might happen and the light never returned. No signs of actual over heating.

So my though is this. I opened the valve (if that's the proper term) to the
rear heater on Halloween night. I ran the blower breifly that night but not
since. THen this morning it was cold and I had the hound in the back so I
turned that rear heater on full blast for him. I am thinking that since the
valve was closed off and I really haven't used that heater much maybe there
was some air hiding in there some where and I just need to bleed the system.


What are your thoughts?

--
Thanks,

Jeff
'90 Carat (Grover)
'86 (We call this one Parts)
'85 GL (Preparing to move to a new Home)
'78 Bus (Melissa) Patty's Bus