Date:         Tue, 6 Nov 2007 23:29:55 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
Comments:     RFC822 error: <W> MESSAGE-ID field duplicated. Last occurrence
              was retained.
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: AT torque converter seal leak
Comments: To: Gerald Masar <azsun99@EARTHLINK.NET>
In-Reply-To:  <007001c820e2$bf6627e0$b9c6f004@computer>
Content-Type: text/plain; charset="US-ASCII"

The seal may not be the only cause of the leak. Plan on replacing the
torque converter bushing and check the seal surface carefully for a
groove. If so it will need to sleeved or other wise welded and repaired. A
torque converter rebuilder will know what to do.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Gerald Masar
Sent: Tuesday, November 06, 2007 9:06 PM
To: vanagon@GERRY.VANAGON.COM
Subject: AT torque converter seal leak

Okay, I was wrong, the leak was NOT coming from the final drive cover, but
appears to
be coming from the TC seal.
It isn't too bad, but makes a mess on the firewall.
Are there any leak sealers (snake oil?) products that might stop a minor
leak there?
Jerry