Date:         Tue, 13 Nov 2007 16:18:45 -0500
Reply-To:     Kenneth Lewis <kdlewis@NORTHSTATE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kenneth Lewis <kdlewis@NORTHSTATE.NET>
Subject:      Re: (Symptoms) No Start, Hesitate at Start
Comments: To: Blake Heinlein <blakeheinlein@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Blake,
First check the Idle position sensor. You should be able to hear it
click(engine off) when someone presses, then releases the gas pedal.
Next the TEMPII sensor, just replace it. If it's not bad it soon will be.
Ken Lewis
http://neksiwel.20m.com/


----- Original Message -----
From: "Blake Heinlein" <blakeheinlein@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, November 12, 2007 9:36 PM
Subject: [VANAGON] (Symptoms) No Start, Hesitate at Start


> Hi everyone,
>
> I had a little starting trouble today in my 84 Westy today. After
> driving 3 miles, stopping to have lunch, I tried to start it after
> lunch and the van would crank strong and it was trying to fire but
> wouldn't start. I kept trying every minute or so. After 10 minutes the
> van finally started and ran strong after that with no hesitations or
> stumbling.
>
> The only other problems are when I start the van cold and on the first
> couple of starts from a stop the van will hesitate with normal
> throttle depression. Within a second or two it will catch up and take
> off down the road. This doesn't happen all the time.
>
> Between these two problems there doesn't seem to be any predictable
> patterns for the cause of the problems. A couple people recommended
> this sounds like a mass air flow meter problem. Anyone have
> experiences with these types of problems? Any pointers on how to
> diagnose and/or reasoning.
>
> Thanks!
>
> --
> Blake Heinlein
> http://blakeheinlein.googlepages.com/
>