Date:         Tue, 13 Nov 2007 18:39:59 -0700
Reply-To:     alfred bagdan <abagdan@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         alfred bagdan <abagdan@SHAW.CA>
Subject:      Re: (Symptoms) No Start, Hesitate at Start
Comments: To: Keith Hughes <keithahughes@QWEST.NET>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response

I had a similar problem recently, replaced the ignition module and that
fixed it.

Alfred
85 Westy


----- Original Message -----
From: "Keith Hughes" <keithahughes@QWEST.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, November 13, 2007 4:47 PM
Subject: Re: (Symptoms) No Start, Hesitate at Start


>> Date:    Tue, 13 Nov 2007 14:26:58 -0800
>> From:    Blake Heinlein <blakeheinlein@GMAIL.COM>
>> Subject: Re: (Symptoms) No Start, Hesitate at Start
>>
>> Jake,
>>
>> The engine turns over continuously and every time I turn the key. The
>> engine will crank but it will not fire, catch, and continue running. I
>> don't think there is a problem with the ignition and starter system.
>>
>> Thanks,
>> Blake
>>
> Actually, a bad ignition switch can, and IME, does exactly that.  They
> get worn, and when engaging the "start" contacts, the "ON" contacts are
> not making contact. BTDT.  Carry a jumper wire with you long enough to
> reach from the B+ on the alternator to the B+ on the coil.  Next time it
> happens, connect the jumper (essentially hot-wiring it) and if it
> starts, replace the ignition switch.  I always carry a spare with me.
>
> Keith Hughes
> '86 Westy Tiico (Marvin)