Date: Fri, 16 Nov 2007 11:04:45 -0800
Reply-To: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject: Re: Compression tester question
In-Reply-To: <c4e7c5f90711161046i4f632213r9c283c60e86c841e@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
I'm sure your neighbour would be happy to help.
Don't you have any kids in the area? When I was 9 I would have killed for
the chance to sit behind the wheel and turn the key.
On Nov 16, 2007 10:46 AM, neil N <musomuso@gmail.com> wrote:
> thanks. Wasn't sure if it was faulty. It's new.
>
> I'll get a remote starter and see how that works out. I should have
> one anyways to do this.
>
> Thanks,
>
> Neil.
>
> On 11/16/07, David Kao <dtkao0205@yahoo.com> wrote:
> > Neil, I think even it has the valve it will leak.
> > Mine leaks. So by the time you jump off from the driver
> > seat to get to the rear the gauge will show a lower
> > reading. It takes a few seconds for mine to leak 10 or even
> > 20 PSI. So what you see is probably normal. If you read
> > 100 PSI it probably had 120 or higher.
> >
> > David
> >
> > --- neil N <musomuso@GMAIL.COM> wrote:
> >
> > > thanks. good to know.
> > >
> > > yah it's the kind with the release valve.
> > >
> > > Maybe the connectison to adaptor or to gauge are hinky
> > >
> > > On 11/16/07, Don Spence <dkspence@telus.net> wrote:
> > > > The gauge will hold peak pressure if it is the type designed to do
> > > > so. If such, it will have a release button to zero the gauge. It
> not
> > > > it will register the pressure it sees. You have to watch it and read
> > > > peak pressures. In the case as described (dropping pressure) that
> > > > would indicate either leaking valves or worn rings. Do a dry/wet
> > > > pair of tests on each cylinder. (test dry then squirt some oil into
> > > > the cylinder and test again.) If a noticeable improvement you have
> > > > worn rings, if not, leaking valves.Date: Fri,
> > > >
> > > >
> > > >
> > > > 16 Nov 2007 08:26:12 -0800
> > > > From: neil N <musomuso@GMAIL.COM>
> > > > Subject: Compression tester question
> > > >
> > > > Hi all.
> > > >
> > > > I bought a compression tester and tried it on my parts van 1.9 WBX
> > > > engine. On two of the cylinders, the gauge would drop while still
> > > > threaded in sparkplug hole.
> > > >
> > > > I was doing this w/o remote starter.
> > > >
> > > > The gauge should hold its' reading right? i.e. once it's pumped up,
> it
> > > > should stay there correct?
> > > >
> > > > It was threaded properly, and adaptor to hose was threaded properly
> too.
> > > >
> > > > Apologies for such and elementary question!
> > > >
> > > > Neil.
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Neil Nicholson. 1981 Air Cooled Westfalia -
> > > "Jaco" (Bustorius)
> > >
> > > http://web.mac.com/tubaneil
> > >
> >
> >
> >
> >
> ____________________________________________________________________________________
> > Get easy, one-click access to your favorites.
> > Make Yahoo! your homepage.
> > http://www.yahoo.com/r/hs
> >
>
>
> --
> Neil Nicholson. 1981 Air Cooled Westfalia -
> "Jaco" (Bustorius)
>
> http://web.mac.com/tubaneil
>
--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
Crescent Beach, BC
www.crescentbeachguitar.com
http://subyjake.googlepages.com/
|