Does anyone on the list have experience adding the factory AC wiring to a non-AC van. The only part I'm interested in is the 3rd speed radiator condenser fan and which wire triggers it. I'm going to be using a different condenser and evaporator and just need to wire in the needed relays or wiring to activate the fan and wire it into my system so it comes on with the compressor. I've got all the wiring and relays from a parts van that had AC but I'm having trouble figuring out what I need and don't need. My van is a 1987 syncro transporter so I've already got the fan used for the AC vans. Looking at the manual I think all I need is to add the 2nd and 3rd stage fan relays. One looks to be above the fuse panel and other is behind the left fresh air vent but I'm not sure about the trigger wire that activated the 3rd speed. If any knows please pmail me, thanks JFF |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.