Allan, First, if you have the Bentley, it will cover it the procedure well. I just did these on a 91 a few weeks ago. What ever you do, do NOT forget to measure from the back of the aft bushing nut to the end of the threads. Don't try to mark it and think it will work (Don't ask how I know). You have to back the nut off a fairly substantial amount and then you put a wrench on the rod and back it out of it's threads on the arm. The rest is cake (you know- assembly is the reverse, yada, yada, yada). You'll be amazed how the new ones look compared to the old ones. Good luck TJ Date: Wed, 28 Nov 2007 21:10:59 -0500 From: Allan Streib <streib@CS.INDIANA.EDU> Subject: replace radius rod bushings Anyone have a how-to on replacing the radius rod bushings? On my '91 Vanagon GL, the outer bushing is completely missing on the driver's side, and the others have seen better days. I have the new bushings -- anything tricky about this job? Thanks, Allan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.