Date: Wed, 28 Nov 2007 16:31:50 -0800
Reply-To: Zoltan Kuthy <zolo@FOXINTERNET.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Zoltan Kuthy <zolo@FOXINTERNET.NET>
Subject: Re: What is the scientific explanation?
In-Reply-To: <000a01c8321d$52b2f780$6701a8c0@TOSHIBALAP>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
I know, I can buy sacrificial anode in all kind of sizes at the marine shop.
Where would I mount it to to make it effective. There are unused threaded
holes on each cylinder heads. Would that work?
Zoltan
----- Original Message -----
From: "Scott Daniel - Shazam " <scottdaniel@turbovans.com>
To: "'Zoltan Kuthy'" <zolo@FOXINTERNET.NET>
Cc: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, November 28, 2007 4:18 PM
Subject: RE: What is the scientific explanation?
Sometimes I put red High Tack gasket sealer on the aluminum fitting before
putting the hose on.
Insulates them electrically, and it comes apart just fine later.
There might even be a dedicated product in the marine industry.
And then there's the Sacrificial Anode radiator cap, everybody knows about
those, right ?
Scott
www.turbovans.com
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Zoltan Kuthy
Sent: Wednesday, November 28, 2007 3:39 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: What is the scientific explanation?
Chad,
You were the only one who could answer it, so far anyway.
Now, the question is; what is the remedy? What to do to stop it to happen?
Does it also mean that the rubber has some electrical conductivity?
Zoltan
----- Original Message -----
From: Chad Lyles
To: Zoltan Kuthy
Cc: vanagon@gerry.vanagon.com
Sent: Wednesday, November 28, 2007 1:37 PM
Subject: Re: What is the scientific explanation?
this is a from of corrosion caused by a current flow generated between
two materials with greatly differing electrical potentials. Contrary to
popular belief, galvanism does not occur just between two different metals;
it can occur between other materials, such as carbon rubber and a metal.
Carbon rubber mated against aluminum, for example, is a disastrous
combination that will destroy aluminum very quickly. This is often found in
carbon rubber hose joined to aluminum or copper pipes and is often referred
to as electro-chemical degradation (ECD)
hope this helps answer the question.
Chad~
On Nov 28, 2007 12:26 PM, Zoltan Kuthy <zolo@foxinternet.net > wrote:
I have always wondered, why would there be extensive aluminum corrosion
built up under rubber hoses on aluminum parts or under the head gasket. I
don't see any electrolysis activity going on under such insulating material.
I am baffled.
Anyone has an acceptable scientific explanation? Or is it something
everyone knows except I.
Zoltan
----------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.9/1157 - Release Date:
11/28/2007 12:29 PM
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.9/1157 - Release Date: 11/28/2007
12:29 PM