Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (November 2007, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 27 Nov 2007 19:42:17 -0500
Reply-To:     Doug Alcock <doug.alcock@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Doug Alcock <doug.alcock@GMAIL.COM>
Subject:      Re: noob already in trouble
Comments: To: jjones04@uoguelph.ca
In-Reply-To:  <20071127172417.y659njbuo40gswww@webmail.uoguelph.ca>
Content-Type: text/plain; charset=ISO-8859-1

You've already had a bunch of good advice by better mecahnics than I. One other thing to try (and it's very cheap) is a couple of bottles of gasline antifreeze in your gas tank. Your symptons could be water or condensation in the gas tank --- and the gasline antifreeze will solve+ it quickly if that's the problem. While on the subject ---- your 20 year old vehicle has a gas tank that is very prone to rust --- particularly on the top of it. I put up with my rusty gas tank for 7 years ( in my 85 Westy) before replacing it this year ---- I spent those 7 years dealing with water in gas issues and fouled fuel injectors until I bit the bullet. Just another one of those things to put on your list. In the meantime try the gasline antifreeze :-)

Cheers, Doug (Mississauga ON ---- almost a neighbour)

On 11/27/07, James Reed-Jones <jjones04@uoguelph.ca> wrote: > > Hey all, > > So a quick update on what I have found so far. When I looked at the O2 > sensor it appeared as if the last time it (or the cat) was replaced > the wires were just cut and crimped with butt connectors and left > dangling. So for now I have dried them off, sprayed them with some > wire dryer, waited for that to dry, then wrapped them individually > with tape, then wrapped the whole thing with tape from the sensor up > to the old wire sheath that (I assume) covered all three of the wires > (and put a zip tie on to hold them off the side of the exhaust pipe). > > I guess now all I have to do is wait for it to snow again ;) > > Thanks for all the help, > > - James > > > >> Other info - 1987 vanagon westy > > - Automatic tranny > > - It first started while the engine was warming up but continued after > > it had gotten up to the regular running temp > > - I live in Ontario Canada and today it was blizzarding a nice wet > > slushy snowfall (as an aside I hope Santa brings me winter tires) > > - A similar kind of thing happened once before on a cold damp morning > > but it just happened once then went away. > > > > Any ideas I could check out prior to taking it to a mechanic would be > > great - or if this has been discussed in the list before a keyword to > > do a search for would be great! > > > > >

-- http://www.dougalcock.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.