Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2007, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 24 Nov 2007 09:53:25 -0800
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: Few maintenance questions
In-Reply-To:  <000201c82eb0$2bdb1900$a5f57d0a@DADSTOSHIBA>
Content-Type: text/plain; charset=ISO-8859-1

And may I add that IF thermostat needs to be changed, be careful. I recently read some thread in the archives that one part of the thermostat housing is easily damaged. Not clear on the details, but you might want to search the archives on that one.

Cheers,

Neil.

On Nov 24, 2007 7:37 AM, Dennis Haynes <d23haynes57@hotmail.com> wrote: > The belt is changed and adjusted by loosening and moving the alternator. > That hose is the crankcase breather. Yes it is important. When split, > allows un metered air into the engine making it run like crap and can > allow oil laden blow by to get all over the engine which can also create a > fire hazard. > > Why change the thermostat if it is working? This is not a regular > maintenance task except after an over heating event or you suspect > corrosion failure or you are having temperature control problems. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > David M > Sent: Friday, November 23, 2007 7:08 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Few maintenance questions > > I looked under my engine cover today (first time in > about a year) just to see what is involved in changing > the thermostat. I noticed a couple of other things. > There is a short rubber tube, thicker at one end than > the other, that is split. It goes from the cylindrical > thing (?) to the left of the alternator and connects > to a curved tube that comes out of the left side of > the air cleaner. What is it and is it important? The > other thing is the water pump belt looks kind of old. > How is it changed? It looks like it's easy to remove > the pulley to get the belt off but that wont allow me > to adjust the new belt. Thanks. > > 1987 Wolfsburg, 2.1 automatic. > > > > > __________________________________________________________________________ > __________ > Get easy, one-click access to your favorites. > Make Yahoo! your homepage. > http://www.yahoo.com/r/hs >

-- Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" (Bustorius) http://web.mac.com/tubaneil

Engine swap beginings: http://musomuso.googlepages.com/home


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.