Date: Thu, 29 Nov 2007 10:38:01 -0800
Reply-To: Chad Lyles <chad.lyles@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Chad Lyles <chad.lyles@GMAIL.COM>
Subject: Re: ONE MAN only out of many
In-Reply-To: <C3744C15.34A8%cichowski@montana.edu>
Content-Type: text/plain; charset=ISO-8859-1
after looking around and reading up on some things... sounds like the only
prevention is either replacing EVERY thing aluminum with stainless
steal...or... get an air cooled van haha (just kidding)...because depending
on exactly what materials the rubber has in it. ... if it has high content
of carbon OR epichlorahydrin (which has HIGH amounts of chlorine) ... mixed
with small amounts of water that get in and the aluminum oxide powder (aka
ceramic) layer aluminum produces to help protect from oxidation it creates a
hydrochloric acid that will ultimately corrode the aluminum... not to
mention climate and the amount of salt water that may be in the air (like if
you live near the coast or where they salt the roads)
i think its just one of those things that unless you go to ridiculous
extents... is just a fact of life...i dont know ... i dug pretty deep for
that ...
if you find something out about this let me know ... its going to bug me
now ;)
Chad~
On Nov 29, 2007 9:59 AM, Ben Cichowski <cichowski@montana.edu> wrote:
> I enjoy taking a stab at things, even if I get it wrong...which I often
> do...
>
> Depending on the the components you are talking about, it seems like it
> might be possible to install something analogous to a sacrificial anode -
> like a magnesium ring on the opposite side of the rubber/metal interface.
>
> Unfortunately, I'm not sure how you would pull something like that off
> for,
> say, a rubber gasket on an aluminum block... But it all has to start with
> an
> idea.
>
> OK...commence with the "this guy is an idiot" posts! :)
>
> -Ben
>
>
> On 11/29/07 10:11 AM, "Zoltan Kuthy" <zolo@FOXINTERNET.NET> wrote:
>
> > Probably the most important question to answer is; what makes corrosion
> > between rubber and aluminum? The other is; how to avoid it?
> > Although, I have put this question up more than once within a year,
> nobody
> > even attempted to try to answer it, but ONE.
> > This list is fighting and dreading this symptom the most, yet there is
> not
> > enough knowledge to know how to stop it.
> > Is there more than ONE out of the hundreds of members who knows, or at
> least
> > think he knows?
> > Anyone?
> > Zoltan
> >
>
|