Date: Tue, 11 Dec 2007 14:39:59 -0800
Reply-To: Brendan Slevin <brendan@BELLATAZZA.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Brendan Slevin <brendan@BELLATAZZA.COM>
Subject: Re: ECU relocation / new 1.9 harnesses
In-Reply-To: <057f01c83c45$9afb2760$6901a8c0@valuedba5d11bc>
Content-Type: text/plain; charset="us-ascii"
I'd be be more interested in a pig tail to relocate the ECU with the
existing wiring harness. Anyone see any problems with this?
Brendan
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Bob Donalds
Sent: Tuesday, December 11, 2007 2:32 PM
To: vanagon@GERRY.VANAGON.COM
Subject: ECU relocation / new 1.9 harnesses
as asked to post
Bob
To: Bob Donalds
Cc: fonman4277@COMCAST.NET
Sent: Tuesday, December 11, 2007 12:49 PM
Subject: Re: So thar I was: Now-ECU relocation
I am currently in the final stages of development for the 1.9L digijet
harness. I am looking at starting production sometime after the first of
the year. I would definitely be able to add some extra length in order to
relocate the ECU. Once I get into production and get everything ironed out,
I can look into the modifications needed for relocating the ECU wherever you
desire. Let me know if you have any questions, otherwise I will get back in
touch with you when the digijet harness is ready to go.
could put it on the list. It would also be wonderful if I could get
an idea of what kind of quantities there would be a demand for.
Thanks,
KYLE
www.kyleautomotivespecialties.com
(440) 225-1506
Bob Donalds <donalds1@verizon.net> wrote:
there is a fella that makes harnesses for the early injected vans
he could custom make a harness to have the didijet ECU sit anyplace
http://www.kyleautomotivespecialyties.com
he does nice work I am having him make me a harness for my 85
not sure if he is in production for the digijet harness yet
Bob
----- Original Message -----
From: "Vdub Guy"
To:
Sent: Wednesday, December 05, 2007 11:02 AM
Subject: Was: So thar I was: Now-ECU relocation
>> If I was making a 1.9 waterboxer into my 'go anywhere , do
anything'
>> world
>> class vehicle, I'd move the ecu to under the back seat. It might
be
>> possible
>> to do it without extending wires.
>> I haven't tired, ( yet ) but it's telling that for the next model
86 and
>> 2.1, the ecu went under the back seat
>
>
> What about under the rear storage cabinet (assuming a Westy). I've
seen
> several Subaru conversions where the ECU was located there, and
it's right
> above the stock VW location. Jeff