heh heh..... Thanks for the additions! Neil.
On Dec 7, 2007 5:36 PM, Mark Tuovinen <mst@ak.net> wrote: > 6. Because your a sadist, not a masochist! (a masochist would try) > > 7. Just because somethings can be done does not mean that they should! > > 8. If you have that much spare time available you could use it to find a > cure for cancer, the common cold, wars, and global warming! > > 9. It would be much faster and cheaper to purchase a water cooled van, > but where is the fun in that! > > 10. Because you could save the money by moving to a warmer climate, where > you won't need a heater! > > Mark in AK > > ----- Original Message ----- > From: neil N <musomuso@GMAIL.COM> > Date: Friday, December 7, 2007 12:31 pm > Subject: Friday humour: Top 5 Reasons why you SHOULDN'T try converting an > 81 AC Vanagon to water cooled (pic included) > To: vanagon@GERRY.VANAGON.COM > > > Well I just couldn't think of ten, so there you go! > > 1. Sure. If the ladies or SO don't find you handsome, they'll sure > > find you > > "handy". But truthfully? They'll think you're nuts! > > 2. You're Nuts! > > > > 3. Sure you'll be proud, but it's twice the work! > > > > 4. Hey. It's STILL an 81 Vanagon! > > > > And reason number 5....... > > > > http://tubaneil.googlepages.com/5UpperRadMount.jpg/5UpperRadMount- > > full.jpg > > > > > > "Sure. I'll get that rad mount out. I'll just drill out a few spot > > welds and > > ...... " --- ;^) > > > > All done in humour. I WILL be proud of this when it's done. --- :^) > > > > And FWIW, don't bother drilling out all the spot welds. There's > > more than > > what you see from underneath. There's like 6+ more that are welded > > fromabove the inside behind dash. > > > > If I were to do it again, (cha'! Right!) I'd go at it from inside > > (when dash > > off) and cut around welds nearest inside of van with the cold > > chisel (or > > w.h.y.) then push it down and cut around the rest from the > > outside. The > > metal is soft and a cold chisel will go through it easily. With it > > on the > > bench, you could remove the extra metal more cleanly. > > > > This is for removing from an 85 Vanagon. > > > > > > Neil. > > > > > > -- > > Neil Nicholson. 1981 Air Cooled Westfalia - > > "Jaco" (Bustorius) http://web.mac.com/tubaneil > > > > Engine swap beginings: http://tubaneil.googlepages.com/ > > >
-- Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" (Bustorius) http://web.mac.com/tubaneil Engine swap beginings: http://tubaneil.googlepages.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.