Outstanding, thank you! 7/16ths should do the trick. The local megastore FLAPS website says that the Beck/Arnley 0430899 square filter will also fit, but I'll check when I get there tonight. Thanks again.
> The size of the larger inlet hose is 11mm (VW N 020 300 1). I have used > standard 7/16" hose from a FLAPS, but this uncommon hose isn't really easy > to find. I have gotten away with using 12mm Cloth Braided Emissions/Vapor > Hose (VW N 020 374 1) as the barbs on my pump and the pre-filter pretty > well > accomodate the hose and because there is no pressure to deal with should > be > quite safe. Always use clamps of course. This is what I've run for the > past > 10 years now. > > Now a bonus for you (& other list members) if you choose to use the > factory > style square plastic pre-filter like I do on both my 84s: > > VW: 133 133 511 > Bosch Short: 71013 > Bosch Long: 0450901005 > Wix: 33274 > Fram: G3743 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.