Date: Sun, 9 Dec 2007 13:18:21 -0800
Reply-To: Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject: Re: 2.1wbx + auto trans into 85 GL
In-Reply-To: <392603.9131.qm@web81705.mail.mud.yahoo.com>
Content-Type: text/plain; charset="us-ascii"
Well Dylan, you ought to be thoroughly confused by now - lol !
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Evan Mac Donald
Sent: Sunday, December 09, 2007 9:56 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: 2.1wbx + auto trans into 85 GL
There is no difference in the installation of an auto trans from a '91 to an
auto trans from an '85. My daily driver '85 is right now running the
complete trans from my '91 parts van. The mounts, linkage, everyting is all
the same. The internals between transmissions differ, but we ain't goin'
there! The biggest problem will be swapping the coolant items specific to a
1.9 over, onto your 2.1. The waterpump, thermostat housing, croos-over tube,
etc., etc., will all bolt up, but will need to be swapped. The distibutor is
another notable "keeper". You do not need or really want to change over the
ECU and harness. Lots more trouble than the benefits to be gained.
Just remember to write down somewhere that the engine is not stock....!
dylan friedman <insyncro@yahoo.com> wrote:
As always I should have explained more......................
What I am looking to do is swap the entire driveline from a 91 Carat into an
85 Westy.
The Carat had 60k miles when totaled, front impact and the Westy needs both
engine and trans.
I have all the wiring from the Carat intact so I would rather upgrade the
Westy with all the Carat stuff in the engine bay.
I am trying to keep the labor and time way down on this project and not
disassemble either engine.
So I don't even plan on separating the engine from the trans.
Out of one and into the other.
Thanks to all who fired off quick replies and step by step for the engine.
df
----- Original Message ----
From: Evan Mac Donald <macdonald1987@SBCGLOBAL.NET>
To: vanagon@GERRY.VANAGON.COM
Sent: Sunday, December 9, 2007 12:28:47 PM
Subject: Re: 2.1wbx into 85 GL
There is a great write-up of how-to-do for just this project already
available:
http://www.oldvolkshome.com/19to21.htm
This is the guide I am using right now, to get things set up for my engine
swap in the spring.
dylan friedman <insyncro@YAHOO.COM> wrote:
I am contemplating swapping in a fresh 2.1 wbx in place of a failed 1.9 in
a 85 GL.
I have numerous late model 2.1 engine bay harnesses and ecus.
Is this a plug and play type swap or is the older wiring from the ignition
and front of van not capable of the swap?
TIA,
dylan