Date:         Sat, 8 Dec 2007 10:49:57 EST
Reply-To:     Dvdclarksn@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Clarkson <Dvdclarksn@AOL.COM>
Subject:      Re: fuel injector hoses, replacing
Comments: To: scottdaniel@TURBOVANS.COM
Content-Type: text/plain; charset="US-ASCII"

I found that when you do this job that you need to go back and re-tighten
the fuel injector hose clamps once or twice as they will want to loosen up
slightly. I also found that the Bus Depot has the original brand of fuel line
that came on our vans. Mine original lines held up beautifully over 17 years and
240k. I also used the slim pointed exacto blade to remove the old lines
without  cutting the collars off the injectors.

David Clarkson
1990 Westy (245k)



**************************************Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.