Date:         Thu, 13 Dec 2007 19:15:40 -0800
Reply-To:     Mark Drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Drillock <mdrillock@COX.NET>
Subject:      Re: AMC Cylinder Head Question
Comments: To: David Kao <dtkao0205@YAHOO.COM>
In-Reply-To:  <712832.4742.qm@web82705.mail.mud.yahoo.com>
Content-Type: text/plain; charset=us-ascii; format=flowed

When something like this happens, it is very often a CV axle problem and
not a problem with the tranny. Sometimes the bolts work loose and after
only one or 2 are left they snap. Have someone put it in gear and let
the clutch out while holding down the brake pedal. Then you get down and
look closely at the tranny side flanges, one at a time. If you see
ANYTHING moving it likely means a CV or axle problem.

Mark

David Kao wrote:

> I did not mention, my 84 Vanagon broke its transmission last week.
> I heard a loud snap from the rear, like breaking an axle and I lost
> power to move forward. It was in first gear trying to move into another
> street on a right turn. I can still shift back and forth to every gear
> including reverse. But As soon as I try to let go the clutch pedal I
> can hear noise from the transmission. So the transmission is toast.
> I have one used cheap spare that I can replace. But once the engine
> and the transmission is dropped I have a decision to make between a
> real quality rebuild or a cheap one by myself. .............