Date:         Thu, 20 Dec 2007 21:33:10 -0800
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: Inside the Air Flow Meter / AFM
Comments: To: honemastert@GMAIL.COM
In-Reply-To:  <1318164147-1198214661-cardhu_decombobulator_blackberry.rim.net-1136181282-@bxe007.bisx.prod.on.blackberry>
Content-Type: text/plain; charset="us-ascii"

        That's very good to hear .  I always say where mechanics and
electrons interface, it's a weak spot.  Like points in a points & coil
ignition system, and a phonograph needle too.
  So getting rid of a mechanical sweeper is highly desirable.
How much does gowesty charge for their air mass meter thing ?
how is power, drivability and fuel mileage ?
Is there any fiddling or programming or anything, other than just installing
it ?
Thanks,
Scott 
www.turbovans.com 

oh, on stock  air flow meters, they work all right, but I  always keep  a
spare or two around.  And Air mass meters aren't totally fault free either,
I have a couple of used spares for my 88 turbo Volvo. With spares you can
check and compare  the results of cleaning them, tell for sure when one is
working or not, etc.  
 If the gowesty AAM is really good, and not super expensive, and works like
you'd hope, I'd sure be putting them on any keeper vanagons of mine.   


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Tim Schneider
Sent: Thursday, December 20, 2007 9:25 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Inside the Air Flow Meter / AFM

The guys at gowesty, with the help of folks splitsecond in orange county,
have engineered a system that replaces the guts of the AFM with a more
modern 'hotwire' system.

I have one on my 2.4 wbxer and it's been working well since the springtime
(put it in and tuned it prior and during SdM this year)


Sent via BlackBerry from T-Mobile