Date:         Thu, 27 Dec 2007 09:38:00 -0800
Reply-To:     Old Volks Home <oldvolkshome@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Old Volks Home <oldvolkshome@GMAIL.COM>
Subject:      Re: seeking source for copper crush washers
In-Reply-To:  <718674.81683.qm@web63601.mail.re1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

I have literally hundreds of 12 & 14mm in both "crush" or "flat" style in my
hardware stash, but I've never had any 16mm (no call for them), but I can
source them within a few days.

So for the immediate moment I'm no good in the 16mm department.  Besides, I
think Allan would prefer a closer, more local source.
--
Jim Thompson
84 GL 1.9 "Gloria"
84 Westfalia 2.1 "Ole Putt"
73 K Ghia Coupe "Denise"
72 411 Station Wagon "Pug"
oldvolkshome@gmail.com
http://www.oldvolkshome.com
***********************************
On Dec 27, 2007 8:55 AM, Ed <fasteddy64@yahoo.com> wrote:

> I get mine form the local VW dealership. They stock plenty of them.
>  Ed Maikranz
>
> "Jack R." <jack007@COMCAST.NET> wrote:
>  Allan,
>
> I find that the non-metric is close enough for most applications. And I
> get
> my copper crush washers "cheap" at Harbor Freight
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93324
>
> Jack
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Allan Streib
> Sent: Thursday, December 27, 2007 10:14 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: seeking source for copper crush washers
>
> I need an M14 and M16 sized copper crush washer to reconnect the low
> and high side fittings on my new power steering rack. The one web
> site I found that lists them does not process orders for less than
> $25.
>
> Anyone know a good place to get these? I've tried local hardware and
> a few auto parts stores. Will check NAPA today but not holding out a
> lot of hope based on results elsewhere.
>
> Allan
> --
> '91 Vanagon GL
>