I just went through the fuel line swap in my van. It is sensible to eliminate the plastic wall fitting and just run high pressure line hose through the firewall. The grommets that positing the air cleaner holes are perfect for the firewall hole and you can get them from busdepot! There is one problem though, tjust before passing through the firewall the line comes into contact with a cooling line. The stock plastic tube had piece of asbestine cloth over it. This is a necessary mod! Hopefully, one less flaming vanagon! Jeff |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.