Date:         Fri, 18 Jan 2008 13:45:42 -0500
Reply-To:     Richard Golen <rgolen@UMASSD.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard Golen <rgolen@UMASSD.EDU>
Subject:      Part number needed..
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hi All,

I don't have access to ETKA right now. Can someone get me the part
numbers for two oil breather hoses?

The first hose is a short one which goes from the oil breather tube
on the top of the 2.1 L engine block. This one is less than 2" long,
and attaches to a "heater" with two wires attached.

The second hose goes from that "heater" to the air intake boot just
before the throttle body.


Thanks in advance.


Ric

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.