The stock oil drain plug takes a 13mm socket. No special thin wall required for the stock plug. Mike
Allan Streib wrote: > Arriving home tonight with the motor warm, I wanted to change the > oil. The drain plug head takes a 19mm wrench but all my sockets are > too big to fit into the recess in the case. Do you normally need a > special thin-wall socket to get the drain plug out? Or has someone > put an oversized plug in? > > Allan > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.