In a message dated 1/21/08 10:39:48 PM Eastern Standard Time, mundopacheco@GMAIL.COM writes:
> I am installing, or should I say, my intentions are to install these > E-Codes > in place of my stock headlights, on my 90 Syncro. These have the running > lights, as you will see in my album. My question is, well, how do I wire > this into my stock wiring? Yup, that's all I'm asking for............ > Thanks!!!!! > > the e-code headlights will use your existing wiring, since u have a 91, you just cut off the 9004 plugs and solder some 3 prong plugs from '85 down vanagons or whatever..so you can use the H4 bulb. and then run a pigtail wire from your parking light wire to power your citi lights.. i put e-code 7' rounds in my doka and i just pigtailed the citi lights off the parking lite wires.. i have blue citi lights in my doka. that way i can look cool when i drive up and down the strip with all the riced out handas.. *rolls eyes* i really do have blue citi lights in there tho..lol *cringe*
************** Start the year off right. Easy ways to stay in shape. http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.