On Friday, January 25, 2008, at 02:08 PM, Automatic digest processor wrote: > Date: Fri, 25 Jan 2008 17:07:47 -0500 > From: James Reed-Jones <jjones04@UOGUELPH.CA> > Subject: Re: No start after Temp II replacement > > Thanks for the quick replies. So I have tried swapping back the old > sensor with no effect. > > As for spark - I will be checking for it shortly - when I get someone > to crank the engine for me (and give me a boost). > > Will update when I find out. > > James James, In changing out the Temp Sensor, you may have dislodged the wire on the coil that tells the ECU to fire the injectors. An easy way to check is with a "noid" test light plugged into any injector harness. Otherwise check all the connectors on the coil. Ciao, Gregory Smith Olympia, WA '88 Vanagon 7P '87 Bertone X1/9 Corsa |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.