Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 24 Jan 2008 16:00:03 -0800
Reply-To:     David Kao <dtkao0205@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Kao <dtkao0205@YAHOO.COM>
Subject:      Re: Tranny Jack opinions
Comments: To: Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
In-Reply-To:  <004501c85edf$2de242a0$6501a8c0@TOSHIBALAP>
Content-Type: text/plain; charset=iso-8859-1

Scott:

according to my one time experience, it was much harder for me to put the tranny back. How do you first keep it on the floor jack before trying to raise it to join the engine? It will be difficult to keep it from falling off. The tranny needs to be on the floor jack then the jack needs to be moved to position under the van. This is the hard part. If I position the tranny under the van first it will be very tough to put a floor jack under the tranny in order to raise it. It also needs to be at a perfect spot under the tranny so that when it is raised it remains balanced and will not fall off.

The recommended tranny jack looks good for lowering the tranny. But I am not convinced that it will be any good in installing the tranny.

David

--- Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM> wrote:

> A manual vanagon transmission isn't even that heavy or awkward at all. > I just use a floor jack, with the handle pointing toward the front of the > van. > A transmission jack is usually too big and awkward anyway. > I had one, used it a time or two, went right back to balancing it nicely on > a floor jack. > Works just fine. > It's only a short period of time from when you just start taking it off the > engine, until the jack is lowered all the way to the floor with the trans on > it. I have to 'be cool' and 'clever' a little during that period, but > really, it's a piece of cake. Getting the balance point is the main trick, > but that's not hard to do really. > Like you'd have to pay me extra to get me to use a tranny jack. > Scott > www.turbovans.com > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Ben Cichowski > Sent: Thursday, January 24, 2008 8:21 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Tranny Jack opinions > > Hi all, > > I need to drop the manual transmission out of my '88 Vanagon and wanted to > pick up a transmission jack on the cheap (Not my normal course of action to > go less expensive on tools). > > As I said, I normally, don't skimp on tools. But, in this case, I don't > anticipate using a transmission jack on a regular basis. > So I was wondering if some of the veterans out there would tell me whether > they think this one will do the job. > I'm not sure how long I'll need it, so renting one could add up. > > Here it is, in all its relatively inexpensive glory: > http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=39178 > > Thanks, > Ben > > _________________________________________________________________ > Shed those extra pounds with MSN and The Biggest Loser! > http://biggestloser.msn.com/= >

____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.