Date:         Tue, 22 Jan 2008 17:32:14 -0500
Reply-To:     Ken Lewis <kdlewis@NORTHSTATE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis@NORTHSTATE.NET>
Subject:      Re: No start after Temp II replacement
Comments: To: jjones04@UOGUELPH.CA
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

James,
I hate it when that happens!!!!Try to do a little preventive maintenance and
everything goes to h3ll in a hand-basket.

You need two (main) things to make a motor go; gas and fire .
 I would, turn on the ignition, pull the center wire out of the distributor
(from the coil), lay it on the engine block and turn  the engine over by
hand. You should get a spark where the wire is touching the block. You
should also hear the injector spraying at the same time, twice a revolution.
Let me know what you find.
Ken