The part # is 113-109-619. Note that it is for the intake valve only. It does not work like a normal valve stem seal. It is merely a washer that stop oil from flowing up the valve stem and it only seals when the valve is open. For some reason ETKA dose not show it for the Vanagon and many enginew work well without them. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Scott Daniel - Shazam Sent: Tuesday, February 05, 2008 10:21 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Exhaust & intake valve installation question I just lift the valve off the seat some, line a quarter inch, or even a half inch and wiggle it left and right and see how far it moves to check guide wear. A sixteenth of an inch would be pretty 'too much.' ........or at least ' really getting pretty loose.' The exhaust guides wear more than the intakes usually. Valve seals mount to the top of the valve guide basically and the valve stem slides in them. Scott -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Pascal Giasson Sent: Tuesday, February 05, 2008 5:35 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Exhaust & intake valve instalation question Denis, only one of my heads had the seal washers on the intake valve, but I could not find the part number on ETKA so I assumed that they were not OE. Do you have a part number for those? None of my other 5 heads had them. Also, what keeps it in place on the valve stem? To check for the valve guide wear, do I just push the valve stem until the enc of teh stem it is flush with the guide and measure the movement of the valve "head"? Any suggestions/tricks on how to measure that movement without the VW tool shown in the Bentley? I have that dial measuring tool but I do not have the attachement to mount it to the head. Thanks Pascal '84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.