Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2008, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 6 Feb 2008 13:13:27 -0500
Reply-To:     Roger Sisler <rogersisler2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Sisler <rogersisler2000@YAHOO.COM>
Subject:      Re: Bumper Painting Info/Pics! (who's bored on a Saturday? Me!)
Comments: To: Neil Nicholson <musomuso@GMAIL.COM>

WOW! That yellow bumper looks great! I straightened a couple of bent bumpers once. Most chromed bumper Vanagons fall to bent bumper affliction at sometime or other. I used 2X2 boards about 1 or 2 feet long. I placed one above the other, over the bent section, and squeezed them together via C-clamps. Heat from a torch greased the straightening. Helped quite a bit.Scorched the boards, too.

I now have an all stainless steel chrome bumper and end cap fastener set for sale. $17.99. 32 pieces, with 4, M8 Carriage bolts ( w/ washers and nylon insert lock nuts ) that fit the end caps. Heads painted POR15 black. 4 long, self drilling METRIC ( 4.8 X 50mm) screws for the sides of the end caps ( with washers ). 6, M8X30mm hex head bolts with washers for attaching the bumpers to the vehicle. See it at my ebay store http://stores.ebay.com/werksforwagens

Self drilling screws allow for future removal of the screws, without damaging the end cap, plugs. Not too many end cap hardware kits supply them, let alone supply them in stainless steel.

To remove the end cap plugs,(with pliers) grip the self drilling screw tip where it extends through the sheet metal, in the wheel well. Unscrew it with the plyers till the threads have cleared the body sheet metal. This is what the self drilling tip is for. Push the screw inside the little hole and into the end cap cavity. Then stick a coat hanger or drill bit into this hole and push the end cap plug out , from the inside. Bumper painting thread hijacked. :>) ( That yellow bumper really, really does look nice!)Thanks, Neil.

Roger


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.