I have some slight galling (or small gouges) at three places on my rocker shafts and three corresponding rockers have slight galling as well. I looked at my spare set of rockers and they had much more galling. Is this somewhat "normal" for a motor with 150K? Should I get new shafts and rockers or is there something that is OK. There is not much advice in the three book that I have other than wear limits for the shaft and rocker. Thanks
Pascal '84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.