Yes. Remove the metal carpet edge strip at the door. If it's a passenger van, the carpet has to be moved out of the way and it will have a piece of rubber underlayment that has to be pulled. Then the seat (with the bolts removed) just slides all the way out the door. Mike
Michael Sullivan wrote: > Remember talking about this about a month ago and wanted to make sure....I want to face the middle seat aft. As i recall, you have to loosen seat bolts and SLIDE the seat out the sliding door and back in? Removing the door seal helps? Just don't want to ruin the carpet. Please advise. > Thanks, Michael 91GL > > > Thanks, Michael Sullivan > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.