Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2008, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 10 Feb 2008 20:08:32 -0800
Reply-To:     John Goubeaux <john@UCSB.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Goubeaux <john@UCSB.EDU>
Organization: UCSB
Subject:      Re: Heater hoses
Comments: To: Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
In-Reply-To:  <061a01c86c5f$43536190$6501a8c0@TOSHIBALAP>
Content-type: text/plain; charset=us-ascii; format=flowed

yes, thanks, this makes a lot of sense. I think i will go with a straight piece of pipe or a junction if I can find them. The tees can be put back in place if and when i need the rear heater.

-john

Scott Daniel - Shazam wrote: > The more reliable way to bypass a rear heater would be to remove the plastic > T's.........and replace them with straight hose junctions or even straight > pieces of metal pipe. > The plastic T's deteriorate and get brittle and can just break. > If you jammed a small marble into a hose I don't see how you'd get it out. > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > John Goubeaux > Sent: Sunday, February 10, 2008 5:23 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Heater hoses > > Aren't rear heater core feed lines 1/2 inch? The tees off of the 5/8 > line that goes fwd and comes back show a step down when going to the > rear heater. > > When replacing these lines does one want to use 1/2 inch ? I am about > to replace my heater lines and the plastic tees back aft that fork off > to the rear heater, and I have yet to find any 1/2 heater hose. The 5/8 > seems readily available though. > > I also read a thread regarding disabling the rear heater core, something > that might be useful for those of us in warm climes, where someone > inserted a marble in the lines that go to the rear heater core right at > the tee. This seemed like an interesting way to do it, and as noted > this allowed for easy reversal by un-doing the line and removing the > marble, if and when you need the rear heater. > > -john > > John Bange wrote: > >> On Feb 9, 2008 8:03 AM, Jeff Clayman <jclayman@massmed.org> wrote: >> >> >> >>> What have people done for heater hose replacement in 87 vanagon. Use >>> FLAPS standard heater hose or custom ones from bus depot? >>> >>> >> Bought a 50 foot box of 5/8" insulated heater hose off eBay for $20. >> > Other > >> than a little difficulty getting the spring clamps over the slightly >> > larger > >> than stock outside diameter, it works great. The rear heater uses a weird >> tapered hose which connects to a 5/8x5/8x(something smaller) tee,so that >> > has > >> to be dealt with via Real Parts. >> >> >> -- >> John Bange >> '90 Vanagon - "Geldsauger" >> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.