Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2008, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 12 Feb 2008 19:08:57 -0800
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: Stainless Steel coolant lines
Comments: To: Joe Federici <joefederici@EARTHLINK.NET>
In-Reply-To:  <331FACC1-FADD-469A-AD20-34A5383E4A68@earthlink.net>
Content-Type: text/plain; charset="us-ascii"

Glad to hear you say that JFF. I was going to and thought why bother. But PVC is not indestructible at all. Plastic deteriorates with age and heat.

The advantages of plastic : Cheap to make millions of any item. Light weight, Can't rust,

Disadvantages : Deteriorates with age and heat, just look at the plastic 2.1 waterboxer cooling system parts that fail.

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Joe Federici Sent: Tuesday, February 12, 2008 4:24 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Stainless Steel coolant lines

What if you painted them with clear por-15. UV shouldn't be a issue under the van. Even powder coating these days isn't to expensive. PVC to me doesn't sound like a good idea.

JFF

On Feb 12, 2008, at 5:30 PM, Doug Alcock wrote:

Keep in mind that stainless steel lines rust --- takes a long time but it does happen. I found this out 2,000 km from home and it was inconvenient to say the least. The fix for me was flexible hydraulic hoses that replace the rusted out part of the stainless hoses (the bendy part that goes from the engine to underneath). So I still have stainless underneath the belly pan. I recently had the gas tank changed and before he dropped the tank my mechanic suggested that if there was any doubt about the remaining staninless steel coolant lines that he would replace them with PVC plumbing pipe from Home Depot --- something he apparently does routinely. My lines were OK -- but PVC is something to think about --- cheap and it isn't ever going to rust.

Cheers, Doug

On 2/12/08, Joe Federici <joefederici@earthlink.net> wrote: > > Just wondering if any of the list members with Subaru conversion have > used either the volks cafe or Bus Depot stainless steel coolant > lines. I don't see any issues but thought I'd ask before buying. The > two venders seem to be selling the same thing. Volks cafe includes > the hose clamps but charges a bit more. > > thanks in advance > > JFF >

-- http://www.dougalcock.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.