Date:         Tue, 12 Feb 2008 23:17:31 EST
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: Full width z-bed?? Need 2
Comments: To: vanagonstretch@aol.com
Content-Type: text/plain; charset="US-ASCII"

In a message dated 2/12/08 8:07:55 PM Eastern Standard Time,
vanagonstretch@AOL.COM writes:


> I had no idea they made a full width z-bed. That gives me an idea for what
> to do with my stretch but I have no idea if it would fit. How would 2 z-beds
> installed sideways and facing each other with a removable table? between them
> work? Obviously the millwork would have to be custom built to suit. That
> would give me tons of storage. My stretch is parked for the winter so I can't
> measure but seems to me it would fit. I'm reasonably sure I would have the
> length but how much space would that give me between them? What are the odds I
> could lower the beds to form a big bed right across the bus? And here it the
> biggest question... Where do I find 2 wide z-beds in grey?
>
> If anybody can take time out for a quick measurment that would be great.
>
>

full width z beds were an option on the 85 up passenger vans and were
standard on all 88 up passenger vans.  i have a few of them in grey w/ matching rear
cushions.

problem is, you talking about mounting them longitudinally, along the wall of
your stretch, parallel to eachother?   i dont know how you are going to do
this, because the z beds need the sides of the van to mount into, and the rear
engine deck for the cushion to lay on....

chris


**************
The year's hottest artists on the red carpet at the Grammy
Awards. Go to AOL Music.

(http://music.aol.com/grammys?NCID=aolcmp00300000002565)