Larry, Here's a link to Chris's thoughts on seam rust. http://www.vanagonauts.com/Idiot-s-guide-to-seam-rust-repair180.htm Some other posts on the subject too under General-->The Rust Wars -- John Meeks '91 Multivan, '85 GL bits Northern Michigan KC8ZFN Vanagon Rescue Squad http://www.vanagonauts.com/Vanagon_Rescue_Squad74.htm
On Feb 18, 2008 9:41 AM, Larry Himli <lhimli@aol.com> wrote: > After procrastinating for too long I finally decided to tackle the seam rust > problem. I have been purchasing materials for some time and the rust was > only getting worse. So, I started cleaning out the seams from the exterior > painted side. Then I realized that the problem has to be from damaged or > worn undercoating. What do you recommend for recoating all affected areas? > I remember using spray stuff 30 years ago without good results. I would > think there must be a good quality brush on material. Thanks. > > > > Larry > > 87 Westy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.