I just replaced mine, you can buy the three pieces from Volks Cafe. You need to save the two metal clips,screws, and plastic buttons from the side pieces. The bottom piece uses three screws and three larger fender style washers. JFF On Feb 17, 2008, at 5:42 PM, neil N wrote: Hi everyone. I'm ready to install the rad on my air cooled --> water cooled project. Got the upper support in! What's left of the donors' rad cardboard is toast. Can I install this stuff after rad is in? Not that it likely makes any diff, but this for a new aluminum Behr (Vanagon) rad into an 81 with 85' lower/upper supports.
Thanks! Neil. -- Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" http://web.mac.com/tubaneil http://tubaneil.googlepages.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.