Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2008, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 17 Feb 2008 19:03:04 -0800
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: Radiator cardboard and its replacement
Comments: To: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
In-Reply-To:  <71d9cdf90802171852l3b6a2a05v4ab969ebbee792b5@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

And single head light grills have cardboard attached to them to prevent air from going into the 'cavity' as you call it.

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jake de Villiers Sent: Sunday, February 17, 2008 6:53 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Radiator cardboard and its replacement

Further to this, I noticed while washing Dixie today (first nice day in a month!) that the '86 grille has a molded-in plastic block-off around the sides that isn't present on the '84. Looks like it focuses the cooling air on the rad, rather than the cavity beside.

On Feb 17, 2008 6:12 PM, Evan Mac Donald <macdonald1987@sbcglobal.net> wrote:

> Hey Neil especially, and anybody else who might care - > > I recently replaced all of the fiber-based cardboard air deflectors in my > '85 with plastic "cardboard" stuff. It is used in making shipping dividers, > and has the same structure as corrugated cardboard, but is made of some kind > of styrene. It is mostly immune to automotive solvents, tho I would not use > it to make a gas tank! > > I used the originals as templates, and traced out their shapes on the > sheet of board. I cut the stuff with a big pair of scissors. I then used a > hole-punch to put holes in the places I was going to attach it at, using > zip-ties and screws. > > This stuff was easy to put in, easy to work with, cheap, won't degrade > like the fiber-board stuff, and most important for you and your question, > all went in without removing anything except the old pieces. Except the > grill. And dropping the spare tire down. > > (delays in replies are due to digest accessability... ...by me, that > is!) >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.