Date:         Mon, 18 Feb 2008 07:41:13 -0700
Reply-To:     Larry Himli <lhimli@AOL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Larry Himli <lhimli@AOL.COM>
Subject:      Seam Rust
Content-Type: Text/Plain; charset="us-ascii"

After procrastinating for too long I finally decided to tackle the seam rust
problem.  I have been purchasing materials for some time and the rust was
only getting worse.  So, I started cleaning out the seams from the exterior
painted side.  Then I realized that the problem has to be from damaged or
worn undercoating.  What do you recommend for recoating all affected areas? 
I remember using spray stuff 30 years ago without good results.  I would
think there must be a good quality brush on material.  Thanks.

 

Larry

87 Westy

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.