Date:         Wed, 20 Feb 2008 11:47:31 EST
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: windshield rust repair cost
Comments: To: Andrew.Richards@NIKE.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 2/20/08 11:23:59 AM Eastern Standard Time,
Andrew.Richards@NIKE.COM writes:


> My '87 GL has some bubbling at the opposing corners of its windshield
> base; maybe an inch or so in width on each side.  I'm wondering what
> some of you have paid to have this fixed.  I know it depends on the
> severity of the rust and I'm pretty confident that this job could be
> done with some grinding and a little bondo, but I just don't have the
> means to do it myself.  Thanks for your help.
>
>
>
>

you will need to pull the windshield to fix this properly.   so factor in a
new windshield seal too.
 and as far as bondo to fix rust holes, that is a big NO NO.
use a epoxy based filler or fiberglass, though welding in a patch is the best
way to fix  holes.

and of course this is all in the archives..

chris


**************
Ideas to please picky eaters. Watch video on AOL Living.


(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/2050827?NCID=aolcmp00300000002598)