Oh I just had to google "COPD". I see. Good warning. Yah I use a mask when spraying stuff. Mostly. And I managed to set up a spray booth of sorts. Something that at least creates an in/out air flow. Sure helped when I was spraying my bumpers. Sure made me aware of just how much crap can end up in the air...... and someones lungs if not careful! And of course I was kidding about killing weeds while flushing the gas tank!
Cheers, Neil. On Fri, Feb 22, 2008 at 6:10 AM, John C... <Trvlr2001@comcast.net> wrote: > As Always, Folks; > When Atomizing Carb Cleaner > With Air Pressure.... > (or anything else ) > Wear a Mask With the Appropriate Fume Cartridge... > This of course applies to Paint (especially Epoxy ) > and Sanding / Grinding dusts. > COPD is a real concern for later life. > not to mention the big "C" > Be Careful It's a Jungle Out There !!! > JC.... ;o) > > > -------------- Original message -------------- > From: neil N <musomuso@GMAIL.COM> > > > Thanks Scott. As always very informative. > > > > I almost got to the point of using "biodegradable" grease remover and > > flushing the remains out on my weed riddled lawn, but thought better > > of it --- ;^) > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.