Date:         Thu, 28 Feb 2008 20:19:44 -0600
Reply-To:     Jim Felder <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <jim.felder@GMAIL.COM>
Subject:      Which way is right way for CV joints?
Content-Type: text/plain; charset=ISO-8859-1

I went through the horror recently of replacing all my CV joints with new
ones---from china. At least they were free, that's the only good thing about
them. But they are still junk, so I have rebuilt my originals except the one
I had to replace altogether.
The chinese ones don't have any indication of direction, so they are no help
to look at. But the OEM ones have an embossed side of the center hub (a
raised area) and a flat side.

Which goes in/out?

Thanks,

Jim

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.