Date:         Thu, 28 Feb 2008 19:34:50 -0800
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: Which way is right way for CV joints?
Comments: To: Jim Felder <jim.felder@gmail.com>
In-Reply-To:  <c4e7c5f90802281850m3de48738j96440ce634e05337@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

On Thu, Feb 28, 2008 at 6:50 PM, neil N <musomuso@gmail.com> wrote:

>  (sorry can't recall for sure it bevelled end faces outboard towards
>  wheel....... Seems to me it does though)

Oops.

I should have said: "bevelled end faces facing outward on each end of
the driveshaft".

Neil.



>  On Thu, Feb 28, 2008 at 6:19 PM, Jim Felder <jim.felder@gmail.com> wrote:
>  > I went through the horror recently of replacing all my CV joints with new
>  >  ones---from china. At least they were free, that's the only good thing about
>  >  them. But they are still junk, so I have rebuilt my originals except the one
>  >  I had to replace altogether.
>  >  The chinese ones don't have any indication of direction, so they are no help
>  >  to look at. But the OEM ones have an embossed side of the center hub (a
>  >  raised area) and a flat side.
>  >
>  >  Which goes in/out?
>  >
>  >  Thanks,
>  >
>  >  Jim
>  >
>
>
>
>  --
>  Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"
>
>  http://web.mac.com/tubaneil
>  http://tubaneil.googlepages.com/
>



--
Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"

http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/