Date:         Mon, 25 Feb 2008 14:51:16 -0800
Reply-To:     Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject:      Re: California Imports Bus Shift Rod Bushing Kit?
Comments: To: neil N <musomuso@GMAIL.COM>
In-Reply-To:  <c4e7c5f90802251106l2a057249n3a56e8741ab75fe9@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

Most likely it should say 1980 to 82.

The support bushing above the approximate middle of your fuel tank is not
fitted  in  83 and up vanagons.
The support bushing those use is   bolted to a 'frame member' at the aft
edge of the fuel tank.
Scott
Turbovans

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
neil N
Sent: Monday, February 25, 2008 11:07 AM
To: vanagon@GERRY.VANAGON.COM
Subject: California Imports Bus Shift Rod Bushing Kit?

Hi all.

Anyone used this kit with success?

http://www.cip1.ca/ProductDetails.asp?ProductCode=VWC%2D211%2D711%2D211

I've pretty much confirmed there is a typo, but this kit says: 90-92
Vanagon. Likely should read "80-92".

I'm replacing the center shift rod bushing on my '81 air cooled.

Thanks,

Neil.

--
Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco"

http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/